HP ProLiant DL380 G5 Server Motherboard 436526-001


  • Product: HP DL380 G5 Server Motherboard
  • Category: Refurbished
  • Compatible Model: HP DL380 G5
  • SPS P/N: 436526-001
  • AS#: 013096-001
  • DG#: 013097-000
  • Socket Type: LGA 771/Socket J
    30 Days Hardware Warranty
    Exclusive of Taxes and Shipping Charges**
Categories: ,


HP DL380 G5 Motherboard

Only authorized technicians trained by HP should attempt to remove the HP DL380 G5 Motherboard. If you believe the system board requires replacement. contact HP Technical Support before proceeding.

Removing HP DL380 G5 Motherboard

  • Power down the server
  • Remove all media drives and media drive blanks
  • Removes all hard drives and hard drive blanks.
  • Remove all memory boards and memory board blanks.
  • Removes the processor module.
  • Extend or remove the server from the rack.
  • Remove’s the access panel.
  • Remove’s the media board.
  • Remove the SCSI backplane.
  • Remove all system fans.
  • Remove all expansion boards.
  • Remove the PCI-X Hot Plug basket.
  • Disconnect the cable from the PCI-X Hot Plug mezzanine board, if installed.
  • Remove the system cage.
  • Unlock the latch and open the lever.
  • Using the lever, lift the system board slightly, and slide the system board out through the back of the server.

Installing HP DL380 G5 System Board

  • Align the HP DL380 G5 Motherboard on the tray, and tighten the thumbscrew to secure it.
  • Open each of the processor locking levers in the order indicated, and then open the processor retaining bracket.
  • Install the processor. Verify that the processor is fully seated in the processor retaining bracket by visually inspecting the processor installation guides on either side of the processor. THE PINS ON THE SYSTEM BOARD ARE VERY FRAGILE AND EASILY DAMAGED.
  • Close the processor retaining bracket. When the processor is installed properly inside the processor
  • Retaining bracket. the processor retaining bracket clears the flange on the front of the socket.
  • Press and hold the processor retaining bracket in place, and then close each processor locking lever.
  • Press only in the area indicated on the processor retaining bracket.
  • Install the processor socket cover onto the processor socket of the failed system board.
  • Clean the old thermal grease from the heatsink and the top of the processor with the alcohol swab.
  • Allow the alcohol to evaporate before continuing.
  • Apply all the grease to the top of the processor in the following pattern to ensure even distribution
  • Remove the thermal interface protective cover from the heatsink
  • Install the heatsink, aligning the guide pins and cutouts on the front of the heatsink
  • Installs all components removed from the failed system board.
  • Installs the access panel
  • Slide the server into the rack.
  • Connect each power cord to the server.
  • Connect each power cord to the power source.
  • Power up the server.

Compatible Ram Memory

PC2-5300 Fully Buffered DIMMs (DDR2-667) with 4:1 and 2:1 interleaving available (interleaving requires identical DIMMs)

Compatible Processors CPU

Quad-Core Processors

Quad-Core Intel Xeon Processor X5470
Quad-Core Intel Xeon Processor X5460
Quad-Core Intel Xeon Processor X5450
Quad-Core Intel Xeon Processor E5450
Quad-Core Intel Xeon Processor E5440
Quad-Core Intel Xeon Processor E5430
Quad-Core Intel Xeon Processor L5430
Quad-Core Intel Xeon Processor E5420
Quad-Core Intel Xeon Processor L5420
Quad-Core Intel Xeon Processor E5410
Quad-Core Intel Xeon Processor L5410
Quad-Core Intel Xeon Processor E5405

Quad-Core Intel Xeon Processor X5365
Quad-Core Intel Xeon Processor X5355
Quad-Core Intel Xeon Processor E5345
Quad-Core Intel Xeon Processor E5335
Quad-Core Intel Xeon Processor L5335
Quad-Core Intel Xeon Processor E5320
Quad-Core Intel Xeon Processor L5320
Quad-Core Intel Xeon Processor E5310

Dual-Core Processors

Dual-Core Intel Xeon Processor X5270
Dual-Core Intel Xeon Processor X5260
Dual-Core Intel Xeon Processor L5240
Dual-Core Intel Xeon Processor E5205

Reviews (0)


There are no reviews yet.

Be the first to review “HP ProLiant DL380 G5 Server Motherboard 436526-001”

Your email address will not be published. Required fields are marked *